wan24-Crypto 1.22.0

wan24-Crypto

This library exports a generic high level crypto API, which allows to use an implemented cryptographic algorithm to be applied using a simple interface.

Per default these cryptographic algorithms are implemented:

Usage	Algorithm
Hashing	MD5
	SHA-1
	SHA-256
	SHA-384
	SHA-512
MAC	HMAC-SHA-1
	HMAC-SHA-256
	HMAC-SHA-384
	HMAC-SHA-512
Symmetric encryption	AES-256-CBC (ISO10126 padding)
Asymmetric keys	Elliptic Curve Diffie Hellman
	Elliptic Curve DSA (RFC 3279 signatures)
KDF key stretching	PBKDF#2 (250,000 iterations per default)

These elliptic curves are supported at present:

• secp256r1
• secp384r1
• secp521r1

The number of algorithms can be extended easy, a bunch of additional libraries implementing more algorithms (and probably more elliptic curves) will follow soon.

The goals of this library are:

• Make a choice being a less torture
• Make a complex thing as easy as possible

Implementing (new) cryptographic algorithms into (existing) code can be challenging. wan24-Crypto tries to make it as easy as possible, while the API is still complex due to the huge number of options it offers. Please see the Wiki for examples of the most common use cases, which cover:

• Simple encryption using a password
• Advanced encryption using a private PFS key
• Advanced encryption using a private PFS key and hybrid key exchange
• Advanced encryption using a peers public key
• Advanced encryption using a peers public key and hybrid key exchange

For more examples please open an issue - I'd be glad to help! If you've found a security issue, please report it private.

NOTE: The cipher output of this library may include a header, which can't (yet) be interpreted by any third party vendor code (which is true especially if the raw data was compressed before encryption, which is the default). That means, a cipher output of this library can't be decrypted with a third party crypto library, even this library implements standard cryptographic algorithms.

Using this library for a cipher which has to be exchanged with a third party application, which relies on working with standard crypto algorithm output, is not recommended - it may not work!

Anyway, this library should be a good choice for isolated use within your application(s), if want to avoid a hussle with implementing newer crypto algorithms.

How to get it

This library is available as NuGet package.

These extension NuGet packages are available:

• wan24-Crypto-BC (adopts post quantum algorithms from Bouncy Castle)
• wan24-Crypto-NaCl (adopts the Argon2id KDF algorithm from NSec)

Usage

Hashing

byte[] hash = rawData.Hash();

The default hash algorithm ist SHA512.

MAC

byte[] mac = rawData.Mac(password);

The default MAC algorithm is HMAC-SHA512.

KDF (key stretching)

(byte[] stretchedPassword, byte[] salt) = password.Stretch(len: 64);

The default KDF algorithm is PBKDF#2, using 250,000 iterations.

NOTE: The used Rfc2898DeriveBytes uses SHA-1 as default hash algorithm, which isn't recommended anymore. Another hash algorithm can be chosen by setting KdfPbKdf2Options, which use SHA-384 per default. SHA-1 is still being used as fallback, if no options are given, to stay downward compatible. This fallback will be removed in a newer version of this library.

Example options usage:

(byte[] stretchedPassword, byte[] salt) = password.Stretch(len: 64, options: new KdfPbKdf2Options()
    {
        HashAlgorithm = HashSha3_384Algorithm.ALGORITHM_NAME
    });// KdfPbKdf2Options cast implicit to CryptoOptions

NOTE: In order to be able to use SHA3 hash algorithms, you'll need to reference the wan24-Crypto-BC NuGet package!

Encryption

byte[] cipher = raw.Encrypt(password);
byte[] raw = cipher.Decrypt(password);

There are extension methods for memory and streams.

The default algorithms used:

Usage	Algorithm
Symmetric encryption	AES-256-CBC (HMAC secured and Brotli compressed)
HMAC	HMAC-SHA512
KDF	PBKDF#2
Asymmetric key exchange and digital signature	Diffie Hellman secp521r1

Using asymmetric keys for encryption

This way you encrypt using a stored private key (which will be required for decryption later):

using IAsymmetricPrivateKey privateKey = AsymmetricHelper.CreateKeyExchangeKeyPair();
byte[] cipher = raw.Encrypt(privateKey);
byte[] raw = cipher.Decrypt(privateKey);

In case you want to encrypt for a peer using the peers asymmetric public key for performing a PFS key exchange:

// Peer creates a key pair (PFS or stored) and sends peerPublicKeyData to the provider
using IAsymmetricPrivateKey peerPrivateKey = AsymmetricHelper.CreateKeyExchangeKeyPair();
byte[] peerPublicKeyData = (byte[])peerPrivateKey.PublicKey;// Needs to be available at the provider

// Encryption at the provider (pfsKey shouldn't be stored and can be a new key for every cipher message)
using IAsymmetricPublicKey peerPublicKey = AsymmetricKeyBase.Import<IAsymmetricPublicKey>(peerPublicKeyData);// Deserialize the peers public key of any format
CryptoOptions options = EncryptionHelper.GetDefaultOptions();// Add the asymmetric key information for key pair creation
options.AsymmetricAlgorithm = peerPublicKey.Algorithm.Name;
options.AsymmetricKeyBits = peerPublicKey.Bits;
options.PublicKey = peerPublicKey;// Required for encrypting especially for the one specific peer
byte[] cipher;
using(IKeyExchangePrivateKey pfsKey = AsymmetricHelper.CreateKeyExchangeKeyPair(options))
    cipher = raw.Encrypt(pfsKey, options);// Only the peer can decrypt the cipher after pfsKey was disposed

// Decryption at the peer
byte[] raw = cipher.Decrypt(peerPrivateKey, options);

Time critical decryption

It's possible to define a maximum age for cipher data, which can't be decrypted after expired:

// Encryption
CryptoOptions options = new()
{
    TimeIncluded = true
};
byte[] cipher = raw.Encrypt(password, options);

// Decryption (required to be decrypted within 10 seconds, or the decryption will fail)
options = new()
{
    RequireTime = true,
    MaximumAge = TimeSpan.FromSeconds(10)
}
byte[] raw = cipher.Decrypt(password, options);

By defining CryptoOptions.MaximumTimeOffset you may define a time tolerance which is being used to be tolerant with peers having a slightly different system time.

Asymmetric keys

Key exchange

PFS example:

// A: Create a key pair
using IKeyExchangePrivateKey privateKeyA = AsymmetricHelper.CreateKeyExchangeKeyPair();
byte[] publicKeyData = (byte[])privateKeyA.PublicKey;// Needs to be available at B

// B: Create a key pair, key exchange data and derive the shared key
using IAsymmetricPublicKey publicKeyA = AsymmetricKeyBase.Import<IAsymmetricPublicKey>(publicKeyData);// Deserialize the peers public key of any format
using IKeyExchangePrivateKey privateKeyB = AsymmetricHelper.CreateKeyExchangeKeyPair(new()
{
    AsymmetricAlgorithm = publicKeyA.Algorithm.Name,
    AsymmetricKeyBits = publicKeyA.Bits
});
(byte[] keyB, byte[] keyExchangeData) = privateKeyB.GetKeyExchangeData(publicKey);// Needs to be available at A

// A: Derive the exchanged key
byte[] keyA = privateKeyA.DeriveKey(keyExchangeData);

Assert.IsTrue(keyA.SequenceEquals(keyB));

The default key exchange algorithm is ECDH from a secp521r1 elliptic curve.

Digital signature

// Create a key pair for signature
using ISignaturePrivateKey privateKey = AsymmetricHelper.CreateSignatureKeyPair();

// Sign data
SignatureContainer signature = privateKey.SignData(anyData);

// Validate a signature
privateKey.PublicKey.ValidateSignature(signature, anyData);

The default signature algorithm is DSA from a secp521r1 elliptic curve.

Too many options?

The CryptoOptions contains a huge collection of properties, which follow a simple pattern in case of en-/decryption: Which information should be included in the cipher header, and is an information in the header required? Because the options include information for all sections, there are single values which belongs to the specific section only. If you separate the options into sections, it's easy to overview:

Section	Property	Description	Default value
Encryption	Algorithm	Encryption algorithm name	null (AES256CBC)
	FlagsIncluded	Are the flags included in the header?	true
	RequireFlags	Are the flags required to be included in the header?	true
MAC	MacAlgorithm	MAC algorithm name	null (HMAC-SHA512)
	MacIncluded	Include a MAC in the header	true
	RequireMac	Is the MAC required in the header?	true
	CounterMacAlgorithm	Counter MAC algorithm name	null
	CounterMacIncluded	Include a counter MAC in the header	false
	RequireCounterMac	Is the counter MAC required in the header?	false
	ForceMacCoverWhole	Force the MAC to cover all data	false
	RequireMacCoverWhole	Is the MAC required to cover all data?	false
Encryption / Key creation / Signature	AsymmetricAlgorithm	Asymmetric algorithm name	null (ECDH for encryption, ECDSA for signature)
	AsymmetricCounterAlgorithm	Asymmetric counter algorithm name	null
	KeyExchangeData	Key exchange data (includes counter key exchange data; generated automatic)	null
	RequireKeyExchangeData	Is the key exchange data required in the header?	false
	PrivateKey	Private key for key exchange	null
	CounterPrivateKey	Private key for counter key exchange (required when using a counter asymmetric algorithm)	null
	PublicKey	Public key for key exchange (if not using a PFS key)	null
	CounterPublicKey	Public key for counter key exchange (required when using a counter asymmetric algorithm and not using a PFS key)	null
	PrivateKeysStore	Private keys store to use for decryption, using automatic key suite revision selection (the default can be set to DefaultPrivateKeysStore)	null
	PrivateKeyRevision	Revision of the used private key suite (may be set automatic)	0
	PrivateKeyRevisionIncluded	Is the private key suite revision included in the header?	true, if a DefaultPrivateKeysStore was set
	RequirePrivateKeyRevision	Is the private key suite revision required to be included in the header?	true, if a DefaultPrivateKeysStore was set
KDF	KdfAlgorithm	KDF algorithm name	null (PBKDF2)
	KdfIterations	KDF iteration count	1
	KdfOptions	String serialized KDF algorithm options	null
	KdfSalt	KDF salt (generated automatic)	null
	KdfAlgorithmIncluded	Include the KDF information in the header	true
	RequireKdfAlgorithm	Is the KDF information required in the header?	true
	CounterKdfAlgorithm	Counter KDF algorithm name	null
	CounterKdfIterations	Counter KDF iteration count	1
	CounterKdfOptions	String serialized KDF algorithm options	null
	CounterKdfSalt	Counter KDF salt (generated automatic)	null
	CounterKdfAlgorithmIncluded	Include the counter KDF information in the header	false
	RequireCounterKdfAlgorithm	Is the counter KDF information required in the header?	false
Payload	PayloadData	Plain payload	null
	PayloadIncluded	Is the payload object data included in the header?	false
	RequirePayload	Is payload object data required in the header?	false
Serializer version	CustomSerializerVersion	Serializer version number (set automatic)	null
	SerializerVersionIncluded	Include the serializer version number in the header	true
	RequireSerializerVersion	Is the serializer version number required in the header?	true
Header version	HeaderVersion	Header version number (set automatic)	1
	HeaderVersionIncluded	Is the header version included in the header?	true
	RequireHeaderVersion	Is the header version required in the header?	true
Encryption time	Time	Encryption timestamp (UTC)	null
	TimeIncluded	Is the encryption time included in the header?	false
	RequireTime	Is the encryption time required to be included in the header?	false
	MaximumAge	Maximum age of cipher data (the default can be set to DefaultMaximumAge)	null
	MaximumTimeOffset	Maximum time offset for a peer with a different system time (the default can be set to DefaultMaximumTimeOffset)	null
Compression	Compressed	Should the raw data be compressed before encryption?	true
	Compression	The CompressionOptions instance to use (will be set automatic, if not given)	null
	MaxUncompressedDataLength	Maximum uncompressed data length in bytes (when decrypting)	-1
Hashing / Signature	HashAlgorithm	The name of the hash algorithm to use	null (SHA512)
Key creation	AsymmetricKeyBits	Key size in bits to use for creating a new asymmetric key pair	1
Stream options	LeaveOpen	Leave the processing stream open after operation?	false
Debug options	Tracer	Collects tracing information during en-/decryption	null

Other options, which are not listed here, are used internal only.

If you use a new instance of CryptoOptions, all defaults will be applied. You can override these defaults in the static *Helper.Default* properties, or by setting other values in the CryptoOptions instance, which you use when calling any method.

For encryption these sections matter:

• Encryption
• MAC
• PFS
• KDF
• Payload
• Serializer version
• Header version
• Encryption time
• Compression
• Stream options

In case you want to use the *Counter* options, you'll need to set the CounterPrivateKey value.

For MAC these sections matter:

• MAC
• Stream options

For hashing these sections matter:

• Hashing
• Stream options

For asymmetric key creation the "Key creation" section matters.

For signature these sections matter:

• Signature
• Hashing
• Stream options

The CryptoEnvironment helps configuring the whole wan24-Crypto environment at once by providing an options class which contains all the options that one might miss, when not knowing where to look at:

CryptoEnvironment.Configure(new()
{
    ...
});

NOTE: See the developer reference for details of the CryptoEnvironment.Options class. Options will only be applied, if they have a non-null value.

The CryptoEnvironment has also some static properties for storing some singleton instances (which are used as default for the configurable options).

Crypto suite

You can use a CryptoOptions instance as crypto suite. The type can be binary serialized (using the Stream-Serializer-Extensions) for storing/restoring to/from anywhere.

NOTE: Only crypto suite relevant information will be serialized! This excludes:

• SerializerVersion
• HeaderVersion
• PrivateKeystore (needs to be stored in another place; a default can be set in DefaultPrivateKeysStore)
• PrivateKeyRevision (will be managed automatic)
• PrivateKey (needs to be stored in another place)
• CounterPrivateKey (needs to be stored in another place)
• PublicKey
• CounterPublicKey
• KeyExchangeData
• PayloadData
• Time
• LeaveOpen
• MacPosition
• Mac
• HeaderProcessed
• Password
• Tracer

PKI

Using the AsymmetricSignedPublicKey type, you can implement a simple PKI, which allows to

• define trusted root keys
• define a key revocation list
• sign public keys
• validate signed public keys until the root signer key

// Create the root key pair
using ISignaturePrivateKey privateRootKey = AsymmetricHelper.CreateSignatureKeyPair();

// Self-sign the public root key
using AsymmetricSignedPublicKey signedPublicRootKey = new(privateRootKey.PublicKey);
signedPublicRootKey.Sign(privateRootKey);

// Create a key pair, which will be signed, and a signing request
using ISignaturePrivateKey privateKey = AsymmetricHelper.CreateSignatureKeyPair();
using AsymmetricPublicKeySigningRequest signingRequest = new(privateKey.PublicKey);

// Sign the public key
using AsymmetricSignedPublicKey signedPublicKey = signingRequest.GetAsUnsignedKey();
signedPublicKey.Sign(privateRootKey);

// Setup the PKI (minimal setup for signed public key validation)
AsymmetricSignedPublicKey.RootTrust = 
    // Normally you would have a DBMS which stores the trusted public key IDs
    (id) => id.SequenceEqual(privateRootKey.ID);
AsymmetricSignedPublicKey.SignedPublicKeyStore = (id) => 
{
    // Normally you would have a DBMS which stores the known keys
    if(id.SequenceEqual(privateRootKey.ID)) return signedPublicRootKey;
    if(id.SequenceEqual(privateKey.ID)) return signedPublicKey;
    return null;
};
// Normally you would have a DBMS which stores a revocation list for AsymmetricSignedPublicKey.SignedPublicKeyRevocation

// Validate the signed public key
signedPublicKey.Validate();

As you can see, it's a really simple PKI implementation. It's good for internal use, and if there won't be too many keys to manage. For managing a larger amount of keys, you can use the SignedPkiStore:

using SignedPkiStore pki = new();
pki.AddTrustedRoot(signedPublicRootKey);
pki.AddGrantedKey(signedPublicKey);
pki.EnableLocalPki();

By calling EnableLocalPki all PKI callbacks in AsymmetricSignedPublicKey will be set with methods from the SignedPkiStore instance. This allows signed key and signature validations using your PKI.

The GetKey methods will find the hosted key with the given ID of the public key. The PKI may also host revoked keys. By revoking a key, it'll be removed from the trusted root/granted key tables, and GetKey will throw on key request.

PAKE

Pake (see tests) can be used for implementing a password authenticated key exchange, which should be wrapped with a PFS protocol in addition. PAKE uses symmetric cryptographic algorithms only and uses random bytes for session key generation. After signup, it can be seen as a symmetric PFS protocol, if the random bytes are random for each session and never stored as communicated between the peers.

CAUTION: PAKE doesn't support counter algorithms! For working with PQ counter algorithms, you'll have to combine two PAKE with different options by yourself.

NOTE: For PAKE both peers need to use the same KDF and MAC options. If the algorithm is going to be changed, a new signup has to be performed. In case a peer changes its authentication (identifier or key), a new signup operation has to be performed, too. A signup should always be performed using an additional factor, which was communicated using another transport. An authentication may use a second factor, while it's recommended to use at last two factors for each operation.

PAKE allows single directional authenticated messages and should be performed bi-directional for a bi-directional communication, if possible.

While a MAC can be computed fast, KDF needs time. During a PAKE handshake both algorithms are used on both peers. But the server will perform KDF only after a MAC was validated, which closes a door for DoS attacks by an anonymous attacker.

NOTE: Default options for PAKE can be overridden by setting a custom value to Pake.DefaultOptions.

FastPakeClient/Server allow fast followup authentications after the first authentication of an already known peer (after a signup was performed). They're designed to be alive for a longer time, if the server expects a client to perform multiple authentications. They're good for a single-directional UDP protocol, for example, where each message is PAKE authenticated, and each followup message is encrypted using the session key of the first authentication message.

NOTE: This PAKE implementation is patent free!

Client/server authentication protocol

Asymmetric keys + PAKE

wan24-Crypto implements a client/server authentication protocol for stream connections (like a TCP NetworkStream). This protocol allows

• server public key request
• signup
• authentication

while all features are optional. It implements Zero Knowledge Password Proof (ZKPP) and Perfect Forward Secrecy (PFS).

During a signup an asymmetric public key of the client can be signed by the server for long term use.

The authentication is encrypted using

• (hopefully pre-shared) server public keys and PFS keys
• PAKE

If the public servers keys are not pre-shared, a PKI should be used to ensure working with valid keys.

See the tests (Auth_Tests.cs) for an example of a simple but working client/ server implementation.

On signup, the server needs to store the PAKE identity and the clients public keys, which then need to be provided for a later authentication process. The ClientAuthContext has all the information required to handle a signup or an authentication, and it contains the exchanged PFS session key for encrypted communication, too.

For optimal security (in 2023), you should use an asymmetric PQC algorithm for the key exchange and signature key, and a common non-PQC algorithm as counter key exchange and signature key. You can find asymmetric PQC algorithms in the wan24-Crypto-BC library, for example.

NOTE: Login username and password won't be communicated to the server. If any authentication related information changes, a follow-up signup needs to be performed.

The signup process (as seen from the client; is bi-directional always):

• Send the clients public PFS key
• Start encryption using the servers public key and a private PFS key of the client
• Send the clients public counter PFS key
• Extend the encryption using the servers public counter key and a private PFS key of the client
• Send the PAKE signup request and extend the encryption using the PAKE session key (the request contains the public key suite and a key signing request, if this is the signup of a new user, or the public key suite changed)
• Sign the authentication sequence using the private client key
• Validate the server signature of the authentication sequence
• Receive the servers public PFS key
• Extend the encryption using the private key and the servers public PFS key
• Receive the servers public counter PFS key
• Extend the encryption with the PFS key computed using the private PFS keys and the servers public PFS keys
• Get the signed public client key
• Sign the public key suite including the signed public key and store the private and public key suites

NOTE: The PAKE authentication allows to attach any payload, which enables the app to extend the process with additional meta data as required.

A later authentication process (as seen from the client; may be uni- directional):

• Send the clients public PFS key
• Start encryption using the servers public key and a private PFS key of the client
• Send the clients public counter PFS key
• Extend the encryption using the servers public counter key and a private PFS key of the client
• Send the PAKE authentication request and extend the encryption using the PAKE session key
• Sign the authentication sequence using the private client key

For a bi-directional communication channel in addition:

• Validate the server signature of the authentication sequence
• Receive the servers public PFS key
• Extend the encryption using the private key and the servers public PFS key
• Receive the servers public counter PFS key
• Extend the encryption using the PFS key computed using the private PFS keys and the servers public PFS keys

WARNING: An uni-directional connection does use a PFS key, but this key is being applied on a pre-shared long term key only.

NOTE: Since a temporary client like a browser may not be able to store the private client keys, such a client may only use the signup and not send a key signing request. Then the server is required to identify the authenticating client using the PAKE identifier (not the public key ID).

In total at last three session keys are being exchanged during a request (six session keys for bi-directional communication). The first two keys are pseudo- PFS keys, while the third key is the PAKE session key. Each part of the authentication sequence will be encrypted using the latest exchanged session key (encryption does change each time a new session key can be derived at the server).

NOTE: The encryption key will always be extended by the next derived key, but not replaced.

To avoid replay-attacks, the server should implement methods to deny re-using PFS keys or random byte sequences. A timestamp validation is implemented already (which defaults to a maximum time offset of 5 minutes to the clients system time). So the server should ensure, that a (pseudo-)PFS key or random byte sequence can't be re-used within five minutes after it was received from a client.

NOTE: The long term client key exchange keys can be used for encrypting an off-session peer-to-peer message. They're not used for signup/authentication.

Things that must be known in advance are the used algorithms, while the PFS keys use the public server keys algorithms and key sizes. But these algorithms must be pre-defined in both (client and server) apps anyway:

• Hash algorithm
• MAC algorithm
• KDF algorithm
• Encryption algorithm (and other CryptoOptions settings for encryption)

CAUTION: The chosen encryption algorithm must not require MAC authentication (while built-in MAC authentication like with AEAD is ok). You can find a stream cipher in the wan24-Crypto-BC library, for example. The encryption settings shouldn't use KDF to avoid too much overhead (KDF will be used for PAKE already).

PAKE authentication only

Quiet different from the "Asymmetric keys + PAKE" authentication protocol, there is another implementation, which uses PAKE only. See the tests (PakeAuth_Tests.cs) for an example of a simple but working client/server implementation.

This protocol allows

• signup
• authentication

while all features are optional. It implements Zero Knowledge Password Proof (ZKPP) and Perfect Forward Secrecy (PFS).

CAUTION: At last the signup communication is required to be wrapped with a PFS protocol! Use a TLS socket, for example. A later authentication may be performed using a raw socket.

During the signup the server will respond a random signup to the client. The produces PAKE values need to be stored on both peers for later authentication.

WARNING: This authentication protocol doesn't support the use of a pre- shared key for the signup. This clearly opens doors for a MiM attack during the signup: If the signup communication was compromised, the attacker will be able to authenticate successful later! It's absolutely required to use a wrapping PFS protocol which ensures the server identity, before sending any signup information.

For authentication, the client sends the identifier of the servers PAKE values, which have been pre-shared during the signup. Using random bytes a temporary session key will be calculated and used to send the PAKE authentication request. The temporary session key will then be extended using the now fully exchanged PAKE session key.

NOTE: The authentication may use a raw socket, while a wrapping PFS protocol is of course never a mistake. However, if using raw sockets, a MiM is able to know who is authenticating, because the servers random PAKE identifier needs to be sent plain (and this value won't change, if not forced).

Things that must be known in advance are the used algorithms, which must be pre-defined in both (client and server) apps:

• MAC algorithm
• KDF algorithm
• Encryption algorithm (and other CryptoOptions settings for encryption)

CAUTION: The chosen encryption algorithm must not require MAC authentication (while built-in MAC authentication like with AEAD is ok). You can find a stream cipher in the wan24-Crypto-BC library, for example. The encryption settings shouldn't use KDF to avoid too much overhead (KDF will be used for PAKE already).

In total this authentication may be a good choice for use with fixed client devices, which are able to store the servers PAKE values in a safe way for the long term. But also temporary devices may benefit, if they'll connect to a server multiple times.

Random number generator

You can use RND as a random data source. RND is customizable and falls back to RandomNumberGenerator from .NET. It uses /dev/urandom as data source, if available.

byte[] randomData = RND.GetBytes(123);

NOTE: /dev/urandom may be too slow for your requirements. If you don't want to use RandomDataGenerator (which can speed up RND a lot), you can disable /dev/urandom:

RND.UseDevUrandom = false;

NOTE: In case you want to force using /dev/urandom ONLY:

RND.RequireDevUrandom = true;// This will cause RND to throw on Windows!

The RandomDataGenerator is an IHostedService which can be customized, but falls back to RND per default. The service uses a buffer to pre-buffer random data, in case your RNG is slow. It's possible to define custom fallbacks which are being used in case the buffer doesn't have enough data to satisfy a request. If you use a RandomDataGenerator, you can set the instance to RND.Generator to use it per default.

The full generator process is:

1. Try reading pre-buffered random data
2. If not satisfied, call the defined fallback RNG delegates (RND methods are preset)
3. Default RND methods use RandomNumberGenerator, finally

Each step in this process can be customized in RND AND RandomDataGenerator, while the defaults of RandomDataGenerator fall back to RandomStream and RND, and the methods of RND use RND.Generator or fall back to RandomNumberGenerator. To simplify that and avoid an endless recursion in your code: DO NOT call RND.Get/FillBytes(Async) from a customized RandomDataGenerator! DO call RND.DefaultRng(Async) instead.

If you use the plain RandomDataGenerator, it uses the RandomStream as random data source, if /dev/urandom isn't available or disabled. (RandomStream uses RandomNumberGenerator, finally.)

To sum it up: Use RND for (optional customized) getting cyptographic random bytes. You can use SecureRandomStream.Instance, too (it uses RND on request).

Notes

Sometimes you'll read something like "will be disposed" or "will be cleared" in the documentation. These are important diclaimers, which should be respected in order to work safe with sensitive data.

WARNING: The disclaimer may be missing in some places!

Will be disposed

When noted to a given value, it'll be disposed after the desired operation, or when the hosting object is being disposed.

When noted to a returned value, and you don't want to use the value only for a short term (during the hosted value wasn't disposed for sure), you should consider to create a copy. The hosting object will dispose the value, when it's being disposed.

Should be disposed

This is a disclaimer that reminds you to dispose a returned value after use.

Will be cleared

When noted to a given value, it'll be cleared after the desired operation, or when the hosting object is being disposed/cleared.

When noted to a returned value, and you don't want to use the value only for a short term (during the hosted value wasn't disposed/cleared for sure), you should consider to create a copy. The hosting object will clear the value, when it's being disposed/cleared.

Should be cleared

This is a disclaimer that reminds you to clear a returned value after use. For this usually you can use the Clear or Clean (extension?) method of the value. (In case of Memory<T> or Span<T> it's Clean, because Clear is used to zero out the value already, while Clean will fill it with random bytes before.)

Algorithm IDs

Internal each algorithm has an unique ID within a category:

• Asymmetric cryptography
• Symmetric cryptography
• Hashing
• MAC
• KDF

If you'd like to implement inofficial algorithms on your own, please use the ID bits 24-32 only to avoid possible collisions with official libraries! These are the official implementation IDs (not guaranteed to be complete):

Algorithm	ID	Library
Asymmetric cryptography
ECDH	0	wan24-Crypto
ECDSA	1	wan24-Crypto
CRYSTALS-Kyber	2	wan24-Crypto-BC
CRYSTALS-Dilithium	3	wan24-Crypto-BC
FALCON	4	wan24-Crypto-BC
SPHINCS+	5	wan24-Crypto-BC
FrodoKEM	6	wan24-Crypto-BC
Symmetric cryptography
AES-256-CBC	0	wan24-Crypto
ChaCha20	1	wan24-Crypto-BC
XSalsa20	2	wan24-Crypto-BC
AES-256-GCM	3	wan24-Crypto-BC
XCrypt	4	(none)
Serpent 256 CBC	5	wan24-Crypto-BC
Serpent 256 GCM	6	wan24-Crypto-BC
Twofish 256 CBC	7	wan24-Crypto-BC
Twofish 256 GCM	8	wan24-Crypto-BC
Hashing
MD5	0	wan24-Crypto
SHA-1	1	wan24-Crypto
SHA-256	2	wan24-Crypto
SHA-384	3	wan24-Crypto
SHA-512	4	wan24-Crypto
SHA3-256	5	wan24-Crypto-BC
SHA3-384	6	wan24-Crypto-BC
SHA3-512	7	wan24-Crypto-BC
MAC
HMAC-SHA-1	0	wan24-Crypto
HMAC-SHA-256	1	wan24-Crypto
HMAC-SHA-384	2	wan24-Crypto
HMAC-SHA-512	3	wan24-Crypto
HMAC-SHA3-256	4	wan24-Crypto-BC
HMAC-SHA3-384	5	wan24-Crypto-BC
HMAC-SHA3-512	6	wan24-Crypto-BC
KDF
PBKDF#2	0	wan24-Crypto
Argon2id	1	wan24-Crypto-NaCl

PAKE has no algorithm ID, because it doesn't match into any category (there is no PAKE multi-algorithm support implemented).

Counter algorithms

A counter algorithm is being applied after the main algorithm. So the main algorithm result is secured by the counter algorithm result. You can use this in case you want to double security, for example when using post quantum algorithms, which may not be trustable at present.

The HybridAlgorithmHelper allows to set default hybrid algorithms for

• key exchange in KeyExchangeAlgorithm
• signature in SignatureAlgorithm
• KDF in KdfAlgorithm
• MAC in MacAlgorithm

and exports some helper methods, which are being used internal during encryption (you don't need to use them unless you have to). If you want the additional hybrid algorithms to be used every time, you can set the

• EncryptionHelper.UseHybridOptions
• AsymmetricHelper.UseHybridKeyExchangeOptions
• AsymmetricHelper.UseHybridSignatureOptions

to true to extend used CryptoOptions instances by the algorithms defined in the HybridAlgorithmHelper properties.

WARNING: The HybridAlgorithmHelper counter MAC implementation isn't really good - it's only a trade-off to gain compatibility and performance. You should consinder to create a counter MAC from the whole raw data manually, if possible, instead.

Post quantum safety

Some of the used cryptographic algorithms are quantum safe already, but especially the asymmetric algorithms are not post quantum safe at all. If you use an extension library which offers asymmetric post quantum safe algorithms for key exchange and signature, you can enforce post quantum safety for all used default algorithms by calling CryptoHelper.ForcePostQuantumSafety. This method will ensure that all used default algorithms are post quantum safe. In case it's not possible to use post quantum algorithms for all defaults, this method will throw an exception.

NOTE: AES-256 and SHA-384+ (and HMAC-SHA-384+) are considered to be post quantum-safe algorithms, while currently no post quantum-safe asymmetric algorithms are implemented in this main library (wan24-Crypto-BC does implement some).

Disclaimer

wan24-Crypto and provided sub-libraries are provided "as is", without any warranty of any kind. Please read the license for the full disclaimer.

This library uses the available .NET cryptographic algorithms and doesn't implement any "selfmade" cryptographic algorithms. Extension libraries may add other well known third party cryptographic algorithm libraries, like Bouncy Castle. Also "selfmade" cryptographic algorithms may be implemented by extensions.